This 4dBi high-performance 4G LTE PCB Flex Antenna is designed to provide reliable wireless connectivity in a compact form factor. It provides a strong and stable signal for data transmission and reception. It is built with a flexible printed circuit board (PCB) that allows it to conform to di..
The DS3231 RTC module is a low cost real time clock that is commonly used with microcontrollers to keep track of real world Date and Time. The module consists of two important ICs namely DS3231 and AT24C32 IC with a crystal oscillator, and a temperature sensor.
RTC modules are simply TIME and DAT..
240×240, General 1.54inch LCD Display Module embedded ST7789 driver, using SPI bus Comes with examples for Raspberry Pi, Arduino, STM32, etc.
Features at a glance:
240×240 resolution, 65K RGB colors, clear and colorful displaying effect
SPI interface, minimizes required IO pins,..
Bus Pirate v3.6a is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols all at voltages from 0-5.5V DC. Working with the Bus Pirate is simple and effective type commands into a terminal on your computer..
SparkFun LiPo Charger/Booster - 5V/1A is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. This LiPo charger is a very economical choice that is equipped with a simple booster circuit utilizing the PAM2401 IC, and includes protection diodes so you can run multiple ce..
The 3.2 Inch Touch Display(C) provides you with the ability to create a standalone device that can be utilized as a custom tablet or an all-in-one interactive interface for a future project using using STM32 Open series. It is 320*240 DOTS Multicolor Graphic LCD, with touch screen and stand-al..
The D24V5Fx family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 36 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 93%, which is much more e..
This 24-inch (600-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s ..
This is a breakout board for Sparkfun's right-angle, 24-pin ATX connector.
Pair this board with the ATX connector and a standard PC power supply
and you'll have 3.3V, 5V, and ±12VDC to supply to your project. Make
sure you ground the PS_ON pin to enable all of the outputs.
All outputs of t..
Description: This is a Samsung S3C2440 micro contoller based system on module. It has 6-layer 70*50mm PCB, 2 x 4Banks x 4Mbits x 16bits (64MB) SDRAM, 256M Nandflash, 4MB NOR Flash, dual operating system (Both WinCE and Linux can be loaded at the same time)Specifications:CPU:Samsung S3C2440A-40..